The Mechanical Properties of Electrolytic Deposits [Paperback]

I. Certain Aspects of the Electrocrystallization of Metals.- II. The Hydrogenation of Metals.- The Adsorption of Hydrogen and Other Gases on Metals.- Gas Diffusion in Metals.- The Effect of Temperature.- The Effect of Pressure.- The Effect of the Surface State.- The Effect of Alloying Substances.- The Effect of Deposit Structure.- Real Crystals and the Mechanism of Gas Diffusion through Metals.- The Solubility of Hydrogen in Metals.- III. Methods of Studying the Hydrogenation of Electrolytic Deposits.- The Method of Vacuum Heating.- The Rheometer Method.- The Molten Metal Method.- The Method of Deformation of the Metallic Cathode.- IV. The Effect of Various Factors on the Hydrogenation of the Metallic Deposit.- The Effect of the Nature of the Metal.- The Effect of Current Density.- The Effect of Temperature.- The Effect of the pH of the Electrolyte.- The Effect of the Structure of the Metal.- V. The Rate of Evolution of Hydrogen and the Mechanism of Its Occlusion in the Deposit.- VI. The Effect of Hydrogenation on the Overvoltage for Metal Deposition.- VII. The Adsorption of Surface-Active Substances in Electrodeposition.- The Adsorption of Surface-Active Substances in the Electrodeposition of Silver from Nitrate Solutions.- The Adsorption of Alcohols in the Electrodeposition of Zinc.- The Effect of the Conditions of Electrolysis and the Nature of the Surface-Active Substance on the Rate of Adsorption of the Latter on the Electrode Surface.- VIII. Methods for Measuring and Evaluating Internal Stresses.- Method of Deformation of a Glass Bulb (Mills Method).- The Method of Cathode Bending.- The Spiral Contractometer of Brenner and Senderoff.- The Strain Gauge Method.- The X-Ray Method of Determining Internal Stress.- IX. The Effect of Various Factors on the Internal Stress.- The Effect of the Nature of the Deposited Metal.- The Effect of the Nature and State of the Base.- The Variation in Internal Stress after Cutting Off the Current.- The Variation of the Internal Stls: