This Brief describes the influence of the different organic chelating agents on the topography, physical properties and phases of SPPS-deposited spinel ferrite splats. The author describes how by using the SPPS process, the coating is produced directly from a solution precursor and how all physical and chemical reactions such as evaporation, decomposition, crystallization and coating formation occur in a single step. The author details not only the innovative approach to liquid feeding, but also focuses on its effects on the spinel ferrite system. The results of experimentation as well as detailed explanations of the experiments are included.2.6?Chelating agents 2.6.1?Mineral processing examples of using chelating agents 2.6.2?Polymeric chelating agent 2.6.3?Organic acids 2.6.4?Summary of benefits and detriments of chelating agents 2.7?Introduction of thermal spray technology 2.7.1?Thermal spray techniques 2.7.2?Plasma 2.8?The phenomena controlling the plasma jet 2.8.1?Plasma torches used for suspension or solution spraying 2.8.2?Radio frequency plasma torches 2.9?Feedstock delivery systems 2.9.1?Spray atomization 2.9.2?Powder feeding systems 2.9.3?Gravity-based devices 2.9.4?Rotating wheel devices 2.9.5?Fluidized-bed systems 2.9.6?Liquid feeding systems 2.10?Quality control and feedstock material specification 2.11?Physical and chemical phenomena with liquid feedstock Thickness of thermal sprayed coatings 2.15?Concluding remarks 3.?Experimental methods 3.1?Solution precursor preparation (Vary the types of chelating agent 3.2?Solution precursor preparation (Vary the concentrations of chelating agent) 3.3?Plasma spray parameters 3.4?Plasma spray cobalt ferrite splats characterizations 3.4.1?Image analysis 3.4.2?Scanning electron microscopy analysis 3.4.3?Energy dispersive X-ray spectrometry 3.4.4?Raman spectroscopy 3.4.5?Differential scanning calorimetry 4.?Influence of the different organic chelating agents on the topography, physical properties and phase of SPPS-delß